Improved Reversible Zinc Storage Achieved in a Constitutionally Crystalline-Stable Mn(VO3)2 Nanobelts Cathode

Rechargeable zinc-ion batteries (ZIBs) are potential for grid-scale applications owing to their safety, low price, and available sources. The development of ZIBs cathode with high specific capacity, wide operating voltage window and stable cyclability is urgently needed in next-generation commercial batteries. Herein, we report a structurally crystalline-stable Mn(VO₃)₂ nanobelts cathode for ZIBs prepared via a facile hydrothermal method. The as-synthesized Mn(VO₃)₂ exhibited high specific capacity of 350 mAh g⁻¹ at 0.1 A g⁻¹, and maintained a capacity retention of 92 % after 10,000 cycles at 2 A g⁻¹. It also showed good rate performance and obtained a reversible capacity of up to 200 mAh g⁻¹ after 600 cycles at 0.2 A g⁻¹ under −20 °C. The electrochemical tests suggest that Mn(VO₃)₂ nanobelts impart fast Zn²⁺ ions migration, and the introduction of manganese atoms help make the structures more indestructible, leading to a good rate performance and prolonged cycle lifespan.     

Prediction of allergic reaction risk of Shenmai injection based on real-world evidence coupled with UPLC–Q-TOF-MS

The allergic reaction (AR) of Chinese herbal injection (CHI) has become one of the most noticeable focuses of public health in China. However, it still remains a considerable controversy as to whether low-molecular-weight components in CHI have potential sensitization. In this study, the relationship between AR and low-molecular-weight component profile of Shenmai injection was explored by an interdisciplinary technology integrating real-world evidence and ultra-performance liquid chromatography–quadrupole time-of-flight mass spectroscopy (UPLC–Q-TOF-MS). The AR information of hospitalized patients was obtained by comprehensively analyzing real-world evidence from January 2015 to June 2019 at two Chinese hospitals. The UPLC–Q-TOF-MS was exploited to systematically investigate the low-molecular-weight component profile with 50–1500 m/z mass range, and 3725 MS1 peaks were detected. The optimized partial least squares discriminant analysis model was established to map the influence of low-molecular-weight components on AR. The results of this study showed that high levels of organic acids administered intravenously might be a potential risk factor for inducing AR. By using this method, Shenmai injection with high AR risk could be recognized precisely with 100% accuracy before clinical use.     

Conjugated polymer nanoparticles with aggregation induced emission characteristics for intracellular Fe3+ sensing

In this article, a novel zwitterionic conjugated polyelectrolyte containing tetraphenylethene unit was synthesized via Pd‐catalyzed Sonogashira reaction. The resulting polymer (P2), which exhibited typical aggregation‐induced emission (AIE) properties, was weakly fluorescent in dilute DMSO solution and showed bright fluorescence emissions when aggregated in DMSO/water mixtures or fabricated into conjugated polymer nanoparticles (CPNs). The nanoparticles from P2 could be prepared by reprecipitation method with an average diameter around 23 nm. Notably, the cell‐staining efficiencies of lipid‐P2 nanoparticles could be enhanced with lipid encapsulation and these nanoparticles were endocytosed via caveolae‐mediated and clathrin‐mediated endocytosis pathways. Furthermore, the lipid‐P2 nanoparticles with low cytotoxicity, high photostability and efficient cell staining ability could be employed for in vitro detection of Fe³⁺ ions in A549 cells. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1686–1693     

Extraordinary transport behavior of gases in isothermally annealed poly(4‐methyl‐1‐pentene) membranes

Poly(4‐methyl‐1‐pentene) (PMP) membranes were modified through isothermal annealing to investigate the change of their crystalline structure and rigid and mobile amorphous fractions (RAF and MAF), assuming a three‐phase model, affected the gas transport behavior. The crystalline structure was characterized by wide‐angle X‐ray diffraction (WAXD) and small‐angle X‐ray scattering (SAXS) techniques, and the free volume properties were analyzed by positron annihilation lifetime spectroscopy. Compared with the pristine membrane, the annealed membranes show higher crystallinity; the crystals undergo partial structural change from form III to form I. The lamellar crystal thickness, rigid amorphous fraction thickness, and long period in the lamellar stacks increase with crystallinity. The annealed PMP membranes exhibit higher permeability due to the increase in larger size free volumes in MAF and higher selectivity due to the increase in smaller size free volumes in RAF, respectively. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 2368–2376     

Crosslinkable high dielectric constant polymer dielectrics for low voltage organic field‐effect transistor memory devices

I n this study, we successfully synthesized water/methanol soluble random copolymers with a high dielectric constant, poly(n‐(hydroxymethyl) acrylamide‐co‐5‐(9‐(5‐(diethylamino)pentyl)?2‐(4‐vinylphenyl)?9H‐fluorene(P(NMA‐co‐F6NSt)), which contained chemical crosslinkable segment (NMA) and hole trapping building block (F6NSt). The feeding molar ratios of two monomers (NMA:F6NSt) were set as 100:0, 95:5, 80:20, and 67:33 for the copolymers of P1 , P2 , P3, and P4 , respectively. The crosslinked P(NMA‐co‐F6NSt) thin film could serve as both dielectric and charge storage layers in organic field‐effect transistor (OFET) memory device and exhibited high k (i.e., 4.91–6.47) characteristics, leading to a low voltage operation and a small power consumption. Devices based on the P1 ‐ P4 dielectrics showed excellent insulating properties and good charge storage performance under a low operating voltage in a range of ±5V because of tightly network structures and well‐dispersed trapping cites. In particular, P3 ‐based memory device exhibited a large memory window of 4.13 V with stable data retention stability over 10⁴ s, a large on/off ratio of 10⁴, and good endurance characteristics as high as 200 cycles. The above results suggested that a high‐performance OFET memory device could be facilely achieved using the novel crosslinkable high‐k copolymers. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3224–3236     

Controlled Variable Oxidative Doping of Individual Organometallic Nanoparticles

The charging and controlled oxidative doping of single organometallic ferrocene nanoparticles is reported in aqueous sodium tetrafluoroborate using the nano‐impacts method. It is shown that ferrocene nanoparticles of approximately 105 nm diameter are essentially quantitatively oxidatively doped with the uptake of one tetrafluoroborate anion per ferrocene molecule at suitably high overpotentials. By using lower potentials, it is possible to achieve low doping levels of single nanoparticles in a controlled manner.